13 ways to cool down your computer in summer

Computers are becoming an indispensable support device for work, but like humans, computers cannot withstand high temperatures. At that time, the components will quickly fail and cannot operate normally.

When the outdoor temperature is too hot or the computer has to operate continuously, it will easily become hot and you need to apply some cooling methods to your computer if you do not want it to suddenly “fall ill”.

A computer is a block that includes many component devices such as CPU, graphics card, main …, and they will generate heat when operating. A well-configured PC usually has a high level of heat dissipation due to the use of multiple cooling fans and heat solutions. If your computer has insufficient heat dissipation, the system temperature will increase, directly threatening the life of the machine. Therefore, cooling PC computers is always considered a top priority for computer users. If you check your computer’s temperature and find it exceeds the allowed limits, here is a simple PC cooling solution that you can apply to help keep your computer cooler. Some of the ways in this article can be used to cool the laptop quite well.

Clear the air flow

The PC will “breathe” easier if you clear any obstructions to the heat flow. Make sure that the side and especially behind the PC case are clear of any obstructions. The computer case should be placed at least 5cm from the surrounding barrier. If your computer is under the desk, make sure you don’t leave a lot of things around because the convection air will become hotter if it can’t escape.

Do not open the case

Most computer users often think that opening the PC case will help dissipate heat better, especially on hot days, but experts advise you not to do this. Why? Although opening the case helps the air to dissipate faster, it is accompanied by a lot of dust and small objects flying in, causing the cooling fans to get stuck, and over time they will operate less efficiently, making them less efficient. lower heat dissipation. Not to mention that the expensive components of the computer are also very allergic to dust. Indeed, this approach proves to be beneficial and harmful, maybe at first you will benefit, but then you will suffer more severe consequences.

Computer cleaning

As mentioned above, over time, the main cooling fan of the PC will slow down, which is mainly caused by dirt. One of the most effective ways to cool a PC is to clean it: Clean the internal fans, including chip fans, power fans, and other extra cooling fans. You just need to turn off the computer, open the case, and then use an air compressor to clean the cooling fans. If your PC is too dirty, it may be necessary to disassemble the part for “general cleaning”.

Change the location of the computer, do not put the case on the floor

If your current PC location is too hot or too dusty, you may have to consider moving your PC to a better location. However, while moving you should be careful with your computer’s equipment. Disassembly needs to be gentle to avoid damage, especially with sensitive components such as hard drives, motherboards, CPUs…

Although case computers are designed to be easily placed in many different locations, you should not place the case directly on the floor, because this will make your computer easy to collect dust. . Buy or make your own a form of pallet to place the case about 0.5m above the ground.

A small note is to pay attention to whether the spacer covers the vent hole or not to adjust accordingly. You should also not put the case close to the wall, it will reduce the heat dissipation of the device.

Turn off unused apps

The less work your computer’s CPU has, the cooler your computer will be. Therefore, you should pay attention to turn off unused programs to reduce the load on the system. Pay attention and turn off background applications that often consume a lot of system resources like anti-virus software.

Turn off the computer when not in use

It’s best to turn off your computers when you’re not using them, or at least put them into hibernation. Try to get out of the habit of turning on your phone when you’re not doing anything. Also, if possible, turn off devices that are connected to the computer such as printers, scanners, etc.

Upgrade chip fan

The computer chip (also known as the CPU) is the most important and expensive component of a computer. The possibility of the chip overheating is quite possible if you do not pay attention to it. Usually the cooling fans for the chip are synchronous devices, but over time they will perform worse. From experience, you should equip yourself with a CPU fan with a larger capacity, and it will certainly be the right investment.

Install a cooling fan for the case

Case cooling fans are usually small fans installed in front or behind the case, or inside the case. These fans will help dissipate heat better. You should use 2 cooling fans for the case, one to cool the PC, the other to blow the heat away from the PC. Installing these fans is also very simple, so you won’t need to worry.

No overclocking

Overclocking the computer will help the machine run faster, but accordingly the amount of heat generated is also greater. If your computer’s hardware allows you to overclock while you do not have the corresponding cooling solutions, it is recommended that you do not use this option. You should use the default hardware configuration of the manufacturer to avoid unfortunate risks.

Replace the power supply for the computer

Power supplies are usually equipped with larger cooling fans, and more heat is blown out. If you do not use a fan for the case, the power fan will be the only cooling part for your computer, and this also creates certain risks. If the fan does not work properly, or malfunctions, the heat in the computer is released very quickly. Unfortunately, you cannot replace this fan if it fails, you must replace the power supply.

Extra fan

But having said that, the cooling fan in the computer is not only the power fan, CPU fan, case fan, but also many other parts such as hard drive, graphics card, RAM memory … can also use the attached cooling fan. . In other words, if you feel your hard drive or RAM is too hot, you can use a separate cooling solution for them. If the graphics card gets too hot when playing games, you can upgrade the cooling fan to a larger size.

Install the liquid cooler

This is quite an expensive solution, but it is quite simple to install again. Usually this cooling solution is used for high heat gaming consoles, or high-level overclocking systems. Because these computer systems can’t get cooler even with the fastest and most efficient heatsinks. In this case it is more practical to install a water or other liquid cooler. Water transfers heat well and can significantly reduce the CPU’s temperature.

Water in the computer, sounds unsafe, but don’t worry. Water or other liquid, completely sealed in the cooling system. A circulation pump pushes liquid down to the CPU to absorb heat and then pumps the hot liquid out of the computer.

The installation of this liquid cooler is very easy, you will receive specific instructions when you go to buy it.

Install a phase changer

This is the most efficient cooling technology. The phase changer is like a “refrigerator” for the CPU. It uses many of the same technologies to cool or even freeze the CPU. Because of the use of modern technology and very high cooling efficiency, the cost of the phase changer is not cheap. Personal computer sets, as shown, range from $1,000 to $2,000, business-grade PC sets can range from $10,000 or more.

The above are computer cooling solutions from simple to complex, from self-implementation to buying, depending on the conditions and requirements of use, you can choose the most suitable way to cool your PC. .

See more: